This paint has many various advantages including:

• Applying two various paints over the surface at the same time that gives the ability of creating more harmony to the decorator.
• Not representing defects of using the work surface for a long timed, whether it is the component or large surfaces including walls (various damages of the surface and the absence of a periodic regular cleaning)
• The possibility of repairing surface damages in long term without painting the whole work.
• Unlimited variety of different colors
• The possibility of being applied on the plastic colorable surfaces without needing primers including ABS, Polystyrene and Himepack.
• The possibility of being applied on various primers according to its structures
• Requires no previous experience or special skills in the use of paint
• - The possibility of using various tools for applying the paint including palette knives, brushes, rollers, painting pumps (with or without air) and even multi-color painting pumps.

• For applying on large and continuous surfaces, non-air painting pumps must be used.
• Applying the paint in a suitable painting environment according to environment ventilation and damp.

   Any surface in any form has the ability of accepting this paint, whether it is horizontal or vertical, even on the ceiling or any other certain spatial form of the components.

   Any colorable surface has the ability of accepting this paint. Since on non-plastic surfaces, shiny primers forming the paint of the cracks under the work must be used, in accepting primers, you don't have any constraints, but before using, please test it on a small surface on the component.

   Any varnish can be applied on the finished work after final drying, whether it is shiny or not shiny, ranging from petroresin to oily, immediate and also polyester, polyurethane etc.

• The higher the thickness of the crack paint applied on the component, the produced cracks are bigger and bigger and the lower its thickness, the produced cracks are smaller. For accessing this purpose, you can follow various methods depending on the style of your work:
  • Spray concentrated paint on the cracked paint component.
  • Use a thicker primer color film as the part under the work.
  • Allocate less time to the primer to be dried (of course, this needs more skill, especially in the basic water acrylic primers).
  • Reduce your speed in applying coloring.
• But if you want to produce smaller cracks on the surface, follows the following methods:
  • Make the crack paint more thinner, but you should increase thinness gradually in order to not to prevent from producing cracks.
  • Allocate more time to the primer to be dried.
  • Increase your speed of paint spraying.